| R - Red |
+12V Battery |
Connected to positve battery terminal |
Connects through the Starter Relay (16) to the Starter Motor (15) as well as over the Fuse (14) to the Regulator/Rectifier (8) and Ignition Switch (5) |
| Br - Brown |
Powered by ignition |
Connected to positive battery terminal if ignition is in on position |
Connected with OIL measurement (10), Horn (24), Blinker Relay (26), Fuel Guage (31), Brake Switches (4) / (21) |
| Gy - Grey |
Oil Lamp check |
Connected to positive battery terminal if ignition is in check position |
Used for the OIL check lamp (32) |
| BW - Black / White |
CDI kill switch |
Connected to B (Ground + Negative terminal) unless ignition is in on position |
Killswitch for the CDI (18) |
| GY - Green / Yellow |
Brake Levers |
Connected to positive battery terminal if either brake lever switch is pressed, and the ignition is in on position |
Connected with Rear/Brake Light (12), Ignition Relay (16) |
| YR - Yellow / Red |
12V AC |
Supplied with 12V AC if the engine is running |
Connected with Lights Switch (3), Regulator (8) |
| L - Blue |
Line for the lights |
Supplied with 12V AC if the Lights Switch is on and the engine is running |
Connected with Instrument Light (30), Rear/brake Light (12), HI-Beam Switch (23) |
| Y - Yellow |
High beams |
Supplied with 12V AC if the High Beam Switch is on, the Lights Switch is on and the engine is running |
Connected with Front Light (28), HI-Beam Indicator Light (29) |
| G - Green |
Dim light |
Supplied with 12V AC if the High Beam Switch is off, the Lights Switch is on and the engine is running |
Connected with Front Light (28) |
| LW - Blue / White |
Starter Button |
Connected to GY |
The Start Switch (2) is on this line and closes the circuit from GY over the Starter Relay (16) |
| Br Y - Brown / Yellow |
Blinker Dash Light |
Connected to positive battery terminal if the blinker relay is ticking it and ignition is in on position |
Connected to Blinker Dash Light (33) |
| Br W - Brown / White |
Blinker Power |
Connected to positive battery terminal if the blinker relay is ticking it and ignition is in on position |
Connected to Blinker Set Switch (25) |
| Dg - Dark Green |
Right Blinkers |
Connected to positive battery terminal if the blinker set switch is in right position and the blinker relay is ticking it and ignition is in on position |
Connected with the Right Blinkers (11) / (34) |
| Ch - Chocolate |
Left Blinkers |
Connected to positive battery terminal if the blinker set switch is in left position and the blinker relay is ticking it and ignition is in on position |
Connected with the Left Blinkers (13) / (27) |
| P - Pink |
Horn |
Connected to negative horn terminal if the horn button is pressed and the ignition is in on position |
The Horn Button (24) closes the circuit from Br over the Horn (20) to ground. |
